Posted on November 13, 2013 in News
. The first phase can be combined with your foundation. Especially at small sizes of the framework. Next, put a wooden frame, with the laying of insulation mezhventsovogo on logs, set septum capital of the bar. Cut into sex and ceiling beams wooden frame.
Assembled truss system obreshechivayut roof made of wood, stitched gables and eaves lining. The roof is covered roofing material. Carve a few technology (ventilation) holes in the walls of the blockhouse on the site of the planned windows and doors. You can lay the finishing floor with gaps in the walls. In this case, an application of natural moisture content of lumber. Thereafter, a period of precipitation wooden frame houses or baths, lasting from 6 to 12 months. Minimum time log precipitation depends on the degree humidity timber (felling better defended in the well 1 – 2 months), time years, the size of a log house, and other factors.
House of the logs of natural humidity throughout the year sits at 8-10cm. Technological break in the construction of a wooden house is not only important in terms of further quality finishing. At this time, the wood dries log (natural drying). Rot, fungus damage, ultimately depend on the durability of log home log home right rainfall and baths. The second phase of construction – finishing work. Konopatka log, grinding of logs, the unit of frame walls in a log house, floor rough and finish floors with a heater, inset windows and doors in a log blockhouse, etc.
Posted on November 8, 2013 in News
Swing garage doors – traditional for our garages. The standard garage doors are made of metal 2X2, 5 door m.korobka – profile 60×30, frame garage door – the door leaf – a sheet of 2 mm, profile 40h25, gates lock mortise safe type, locking device can be used one horizontal and two vertical bolts, two-sided painting, including the possible and the powder coat. Swing garage doors – the traditional type of gates to garages. Metal garage doors are easily entered into the finished opening. Swing garage doors are popular because of their ease of maintenance and relatively cheap price.
Sash hinged garage doors open outwards garage and they fixed hinge joints, allowing them easy opening. In order to protect the loop sheds can be installed on metal studs protivosemnyh garage doors. We recommend and an additional visor or awning, as it protects the gate from the snow, rain, and we make excellent shelters for the gate. Garage doors are different from standard metal gate by their installation or installation in garage opening, and they differ in method of manufacture, installation method gate. Can powder coating of metal garage doors and frames on both sides thus dyed provides corrosion protection, improves their appearance. The standard size of garage doors: 2 * 2.5 m. In the manufacture of garage doors, the following work and materials: metal box door – Profile 60 * 30; more ribs; door leaf – leaf 2 .. 2.5 mm; Mortise lock gates of a safe type, may apply a protective bracket, fixing the gate and at the same time protecting the well of the castle.
Woodwork – section 40 * 25 mm. 2 vertical bolts – the bolts. In order to improve the protective properties on second leaf is possible to install a second set of horizontal bolts. Produced painted on both sides, perhaps even with powder paint. By the choice of sticking by the inner surface of the gate penofolom. On request is finishing the inside lining. Perhaps the additional use of trims to give a good appearance. In addition to metal hinged and garage doors we offer a full range of activities and services for metal and more. We also provide installation of plastic windows, glass balconies, installation of hardware such as shutters, steel doors, grilles, fences, barriers, awnings, visors and more.